.很多产品暂未上架 更多产品请联系我们

.如产品型号与展示图片不一致，以型号为准。具体产品图片联系我们，我们会安排到仓库拍照确认

.我们在全球有16个共享仓库，所以有时需要几个小时才能给您准确答复，当然，我们会尽快回复您的疑虑

The GE 336A4940LBP46 is an Ethernet switch used in the Mark VIe safety control system designed by General Electric (GE). This switch is designed to meet the needs of real-time industrial control solutions.

The switch is unmanaged, meaning it does not require a separate device to configure or manage its operation 1. It can operate at temperatures ranging from -40 to 70 °C (-40 to 158 °F) and can be powered by redundant 18 to 36 V DC power sources.

The switch supports store and forward architecture, providing high data confidence. It also provides soft start capability that limits inrush current to less than 200% of the normal operating current.

The switch can be mounted on a DIN rail for installation. There are seven screw holes used on the existing switch to support panel mounting.

The switch uses SFPs with LC Connectors to connect to single-mode fiber-optic cable for new installations 1. GE recommends replacing MMF with SMF. If not, the network is downgraded to only run at 100 MB speed.

IS420ESWBH1A
IS420ESWBH2A
IS420ESWBH3A
369B1860G0026 /MPU55
369B1860G0028 /MPU55
369B1860G0030 /MPU55