.很多产品暂未上架 更多产品请联系我们

.如产品型号与展示图片不一致，以型号为准。具体产品图片联系我们，我们会安排到仓库拍照确认

.我们在全球有16个共享仓库，所以有时需要几个小时才能给您准确答复，当然，我们会尽快回复您的疑虑

GE touch panel IC755CSW07CDA QuickPanel+ Operator terminal The IC755CSW07CDA is a QuickPanel+ Operator terminal. It is part of the Visualization product catalog that is manufactured by Emerson Automation, formerly by GE Intelligent Platforms (GE IP).

 It functions as a Human Machine Interface (HMI), featuring an embedded display measuring 7-inch widescreen TFT LCD screen with resolution of 800 x 480 pixels. It comes with a projected capacitive, multi-touch interface and an Intel Freescale i.MX535 1 GHz ARM Cortex A8 processor. The integrated memory available to this HMI includes 512 MB DDR2 SDRAM; 256 MB SLC NAND Flash and 512 KB SRAM. For communication, this device has One (1) Ethernet, and One (1) RS232 communication ports. This terminal operates at an input supply voltage of 24 VDC.

Brand：GE 

Model：IC755CSW07CDA

Part No： 

Product Name：touch panel | QuickPanel+ Operator terminal

Website:www.plc-module.com 

GE F650BABF2G0LOSHE Feeder protection equipment The F650BABF2G0LOSHE Of PLC And Configure Software In Minitype Automated Storage System Is Introduced In This Paper,Citing The FX-2N Series Programmable Controller

The replace a relay, it is necessary to remove the GE Simplex Trip Board DS200TCTGG1AFF from the drive. Communicate with an engineer or installer who is familiar with the installation of the drive and is experienced with the power supplies connected to the drive. Disable the power supplies by disconnecting the fuse or by other means as required. Use a testing device to test the interior of the drive for electric current, before you continue. Disconnect the cables from the board and diagram the locations of the cables so that you can connect the cables to the right connectors when you reinstall the board.