.很多产品暂未上架 更多产品请联系我们

.如产品型号与展示图片不一致，以型号为准。具体产品图片联系我们，我们会安排到仓库拍照确认

.我们在全球有16个共享仓库，所以有时需要几个小时才能给您准确答复，当然，我们会尽快回复您的疑虑

The 3500/63 Hazardous Gas Monitor is a six-channel monitor that is used as a safety-system element by providing levels of alarms based on the concentration of combustible gases. An alarm issued by this monitor indicates that the gas concentration is sufficient to cause personal safety concerns because of explosion or asphyxiation. It is designed for use with heated catalyticbead gas sensors (Hydrogen and Methane) and indicates hazardous gas concentration as a percentage of the lower explosive level (LEL). The monitors can be utilized in either a simplex or redundant (TMR) 3500 Rack configuration

The Hazardous Gas Monitor application is particularly suited for enclosed or confined spaces where combustible gases are used as fuels or are being handled, pumped or compressed. If a leak occurs, the gases may accumulate and reach a potentially explosive concentration. Detection and alarming on gas concentrations is critical for the.

If the 3500/63 Hazardous Gas Detection Monitor is added to an existing 3500 Monitoring System, the following (or later) firmware and software versions are required: 3500/20 RIM Firmware - Revision L or later, 3500/22M 3500 Rack Configuration Software - Version 3.6 or later, 3500/01 Data Acquisition Software - Version 2.42 or later, 3500/02 Operator Display Software - Version 1.42 or later, System 1ä Version 5.0 or later External Termination Blocks cannot be used with Internal Termination I/O modules. When ordering I/O Modules with External Terminations, the External Termination Blocks and Cables must be ordered separately.