ABB

ABB FOCS | PEC800-PS | PEC800-CO | AC800PEC system module

质保： 365天
质量：原装模组
状况：全新/二手
仓库：现货
发货时间：付款后3天内发货
在线咨询

产品详情

.很多产品暂未上架更多产品请联系我们

.如产品型号与展示图片不一致，以型号为准。具体产品图片联系我们，我们会安排到仓库拍照确认

.我们在全球有16个共享仓库，所以有时需要几个小时才能给您准确答复，当然，我们会尽快回复您的疑虑

ABB FOCS | PEC800-PS | PEC800-CO | AC800PEC system module.ABB FOCS PEC800-PS and PEC800-CO are part of the ABB AC800PEC system, which is a high-performance Programmable Automation Controller (PAC) designed for complex industrial processes. Here are some steps to understand these components better:

ABB PPD115A102 3BHE017628R0102 driver module.jpg

ABB FOCS | PEC800-PS | PEC800-CO | AC800PEC system module

The PEC800-PS is a power supply unit that provides power to the AC800PEC controller and the I/O modules. It has a wide input voltage range and is designed to work in harsh industrial environments.

The PEC800-CO is a communication module that provides a range of communication interfaces to the AC800PEC controller. It is used to connect the controller to various devices such as HMI, SCADA, and other controllers. The PEC800-CO supports various communication protocols such as Modbus, Profibus, and Ethernet.

To use these components, you need to have a basic understanding of the ABB AC800PEC system architecture. The AC800PEC system consists of a controller, I/O modules, and communication modules. The controller runs the control application, while the I/O modules interface with the field devices. The communication modules provide connectivity to other devices.
ABB FOCS | PEC800-PS | PEC800-CO | AC800PEC system module

ABB provides a range of software tools to program and configure the AC800PEC system. The most commonly used software tool is the Control Builder Plus (CBP), which is used to create the control application and configure the system. ABB also provides various add-on software tools such as the HMI Builder, which is used to create the operator interface.

To program the AC800PEC system, you need to have a basic understanding of the IEC 61131-3 programming standard, which is used to program PACs. The IEC 61131-3 standard defines five programming languages: ladder diagram (LD), function block diagram (FBD), structured text (ST), instruction list (IL), and sequential function chart (SFC). The CBP software supports all these programming languages.

ABB FOCS PEC800-PS and PEC800-CO are essential components of the ABB AC800PEC system, which is a high-performance PAC designed for complex industrial processes. To use these components, you need to have a basic understanding of the AC800PEC system architecture, IEC 61131-3 programming standard, and ABB software tools such as Control Builder Plus.

ABB PPD115A102 3BHE017628R0102 driver module...jpg

ABB FOCS | PEC800-PS | PEC800-CO | AC800PEC system module