.很多产品暂未上架 更多产品请联系我们

.如产品型号与展示图片不一致，以型号为准。具体产品图片联系我们，我们会安排到仓库拍照确认

.我们在全球有16个共享仓库，所以有时需要几个小时才能给您准确答复，当然，我们会尽快回复您的疑虑

ALSTOM | 730475-D | ELEMENTS-F2 | Controller module.ALSTOM 730475-D is an automation control module used to control single extraction, exhaust/intake, or intake steam turbines. It is a controller based on a 32-bit microprocessor. The data stored in ALSTOM 730475-D is grouped into set values and actual values. The set points can be read and written by the host computer, while the actual values are read-only. All set values and actual values are stored as two-byte values, and each register address is an address of a two-byte value. The address is listed in hexadecimal, and the data values are represented in decimal.

To work with ALSTOM 730475-D, one needs to understand the power supply circuit. The power supply circuit is a part of the circuit that provides energy to each unit circuit on the entire circuit board. The power supply circuit works in a high-voltage and high-current environment and is the most susceptible part of the circuit to failure. The function of the power supply circuit is to convert 220VAC or 380VAC AC power into DC power.

ALSTOM PCB

If an error other than a CRC error is detected by ALSTOM 730475-D, it will send a response to the host. The MSbit of the FUNCTION CODE byte will be set to 1 (i.e., the function code sent from the device will be equal to the function code sent from the device plus 128). The following bytes of ALSTOM 730475-D will be an exception code indicating the type of error that occurred. ALSTOM 730475-D will ignore transmissions received from a host with a CRC error. The response of the slave to the error (except for the CRC error) is: Slave address: 1 byte, Function code: 1 byte (MSbit set to 1), Exception code: 1 byte, and CRC: 2 bytes.

To develop applications for ALSTOM 730475-D or for more detailed information about the single-board computer, one can purchase additional documentation (installation guide, jumper configuration information, memory maps, debugger/monitor commands, etc.) through the local Motorola sales office. If any supplements have been issued for a manual or guide, they will be furnished along with the particular document.

ALSTOM 730475-D is a RELIANCE product. It is a digital input card with an interface board module. The operating temperature of ALSTOM 730475-D is 0°C to 70°C, and the storage temperature is -40°C to 85°C. The shock resistance is 1500G/0.5ms, and the vibration resistance is 20G/10~2000Hz. The power consumption is 5.5W (Max.), and the dimensions (L x W x H) are 100.2mm x 69.8mm x 7mm.